Reasons for choosing fully automatic roll plating equipment

2025-02-10

1、When replacing the plated material, there is no need to clean the bottom of the material, and it can change the time of pre-treatment and plating as you like, and the production line still works normally without stopping and re-commissioning.

2、Cleaning, polishing, passivation, etc. do not need containers, but with conveyor belt conveyor slide into, to avoid mutual contamination, the drum is always out of plating liquid, pouring clean, greatly reducing the amount of plating liquid with out.

3、Energy saving 10%, power saving 30%, time saving 50%, water saving 90%, labor saving 90%.

4、It is 30% of the price of the similar products, covers an area of small, large and small roll plating plant can be used, the daily output of 5-100 tons.

5、Specialized rolling barrel, no need to open and close the door, and there is no printing of rolling barrel when the current is high.

6、Automatic measuring, automatic loading and unloading, automatic drying, automatic drying and packing into the barrel.

7、High degree of automation, no need for personnel care, low noise, smooth operation, durable.

8、Zinc anode is placed in the rolling barrel, the current does not need to be conducted through the eyelets, and acts directly on the plated material, so the power saving effect is very obvious.

9、With water absorbing device to prevent excess liquid from being brought out.

10、Feeding trolley has liquid box, which can feed the material for long distance without deterioration. Convenient, clocking can be adjusted in the liquid, air retention time. Automatic barrel plating equipment is the best in the plating equipment, is the most widely used plating equipment, with it no longer worry about uneven plating, quality is not pass, pollution of the environment serious drawbacks.